+44 (0)1928 569 251 enquiries@vibrotechnical.co.uk

Engineering

A wide range of products developed for applications in the Engineering industry. Anti vibration, specialised mouldings, fabrications, machined products and pipe supports.

Anti Vibration

For Pipe Supports and Machinery mounting designed to reduce and isolate noise and vibration. products designed and developed from a range of elastomeric and composite constructions.

 Products

  • Pipe Supports
  • Vibro Clips
  • Structural Bearings
  • Cork Rubber Sheets and Pads

Pipe Supports

A range of products developed meet the variable demands of Oil, Gas and Petrochemical industries.The products are designed to support and reduce noise and vibration in a wide range of elastomeric materials.

Vibro U Bolts ( Guides and Grips )

  • U Bolts encapsulated in elastomeric compound.
  • Prevention of abrasive wear between pipes.
  • reduction in noise and vibration transmission.
  • operational temperatures -70° to +300°C.
  • Prevention of electrolytic corrosive action between dissimilar metals.
  • Available in steel,cu-pro nickel,stainless steel and aluminium.

Vibro Clip

Designed to provide a resilient cushion between pipes and retaining clamps in a range of elastomeric materials to suit application temperatures of -70° to +300°C. Vibro Clips are also available with PTFE and Nylon/MDS facings.

  • Vibro Clip 120   –   Temperature range -40° to +120°C
  • Vibro Clip 150   –   Temperature range -30° to +150°C
  • Vibro Clip 700   –   Temperature range -70° to +300°C

Vibro Clips offer the following benefits:

  • Reduction of transmitted noise levels, vibration and shock levels.
  • Prevention of abrasive fretting between piped and clips
  • Electrical isolation between pipe work and pipe clips.
  • Prevention of electrolytic corrosive action between dissimilar metals.
  • Reduction of pipe strain through clip misalignment.
  • Reduction of heat loss through pipe clips.
  • Vibro 700 material is also fire retardant with low toxic smoke emission

Structural Bearings

Vibro Tech bearing pads provide a maintenance free interface to isolate substrates and structures from shock impact and severe vibration.

  • Vibro 300   –   A laminated rubber impregnated fabric for use in severe applications where a close tolerance between opposing faces can be guaranteed. The sheets are compression moulded to required thickness to give a smooth plate finish.
  • Vibro 400   –   A laminated rubber impregnated fabric with a compressible interface for use in severs applications where opposing faces are out of parallel. The sheets are compression moulded to required thickness to give a smooth plate finish.
  • Vibro 500   –   A laminated rubber impregnated fabric faced on one side with Vibro120 to afford either intermittent or continuous heavy impact.

Slide Bearings  

  • Vibro 600 Slide Bearings are easy to install and are relatively maintenance free and consist of two members. The upper member is constructed from Vibro 120 thermally bonded to Nylon/Molybdenum disulphide and a lower member of Vibro 500 thermally bonded to PTFE.
  • The upper member is always larger in size to protect the lower member interface. Upper member thickness 2.5mm
  • The lower member consists of a high impact construction Vibro 500 thermally bonded to PTFE. The thickness can be varied depending on the application but will generally be 8mm ( including 2mm PTFE )
  • The bond slips have excellent weathering and chemical resistance.
  • The Bond slips can be supplied with the metal fixture plates.
  • The interface between the upper and lower member generally gives a co-efficient of friction of < 0.10 depending on load and temperature.

Sheets & Cut Gaskets

  • Supply of cork sheets and gaskets
  • Cut to any customer profile

Asbestos Free Material

  • Supply of asbestos free material in sheet and cut to any customer profile

PTFE

  • Supply of PTFE in both sheet (etched if required) and cut profile

Rubber Seals & Gaskets

  • Supplied in a wide range of elastomers designed to suit specific customer applications.

Mouldings

Custom and bespoke moulded product in a wide range of elastomeric materials produced on both single and multi cavity tooling. Our Product Engineering Service can design and develop tooling and materials upon request.

  • Rubber to metal bonding
  • Anti vibration mounts
  • Industrial bellows
  • Oil seals
  • Veterinary products
  • Moulded laminates
  • Moulded Gaskets

Fabrications

Regal Tech can design and develop technical solutions with regard to fabricated products for Oil, Automotive and Industrial applications.

Fabricated Products

  • Expansion joints in a range of shapes and sizes to accommodate differential pipe and structural configurations.The Expansion joints can be fabricated from a range of elastomeric materials and fabrics to meet customers application requirements.
  • Couplings constructed from high tensile fabrics and specially developed elastomeric compounds

Machined Products

Vibro Tech has the facility to design and develop machined products constructed from a wide range of both elastomeric materials and engineering plastics.

Products

  • Abrasion resistant coverings for feed bearings
  • Machined components for hydraulic seals
  • Routing facility to configure surface profiles as required

Pipe Supports

A range of products developed meet the variable demands of Oil, Gas and Petrochemical industries.The products are designed to support and reduce noise and vibration in a wide range of elastomeric materials.

Vibro U Bolts ( Guides and Grips )

  • U Bolts encapsulated in elastomeric compound.
  • Prevention of abrasive wear between pipes.
  • reduction in noise and vibration transmission.
  • operational temperatures -70° to +300°C.
  • Prevention of electrolytic corrosive action between dissimilar metals.
  • Available in steel,cu-pro nickel,stainless steel and aluminium.

Vibro Clip

Designed to provide a resilient cushion between pipes and retaining clamps in a range of elastomeric materials to suit application temperatures of -70° to +300°C. Vibro Clips are also available with PTFE and Nylon/MDS facings.

  • Vibro Clip 120   –   Temperature range -40° to +120°C
  • Vibro Clip 150   –   Temperature range -30° to +150°C
  • Vibro Clip 700   –   Temperature range -70° to +300°C

Vibro Clips offer the following benefits:

  • Reduction of transmitted noise levels, vibration and shock levels.
  • Prevention of abrasive fretting between piped and clips
  • Electrical isolation between pipe work and pipe clips.
  • Prevention of electrolytic corrosive action between dissimilar metals.
  • Reduction of pipe strain through clip misalignment.
  • Reduction of heat loss through pipe clips.
  • Vibro 700 material is also fire retardant with low toxic smoke emission.